ASTM A333 Grade 10 Welded Steel Pipe/tube
A333 Grade 10 welded steel pipe/tube dimension
ERW; outer diameter:21.3-660mm thickness:6-25mm
LSAW; outer diameter:325-1524mm thickness:6-50mm
SSAW: outer diameter:219-3200mm thickness:5-25mm
ASTM A333 Grade 10 specification covers nominal (average) wall seamless and welded carbon and alloy steel pipe intended for use at low temperature. Several grades of ferritic steel are included. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect on low-temperature impact properties.
ASTM A333 grade 10 material chemical composition
| Element | Carbon, max | Manganese | Phosphorus, max | Sulfur, max | Silicon | Nickel | Chromium | Copper | Aluminum |
| Grade 10 | 0.20 | 1.15-1.50 | 0.035 | 0.015 | 0.10-0.35 | 0.25max | 0.15max | 0.15max | 0.06max |
ASTM A333 Grade 10 Welded Steel Pipe/tube mechanical properties
| Grade 10 | ||
| Psi | MPa | |
| Tensile strength, min | 80 000 | 550 |
| Yield strength, min | 65 000 | 450 |
| Longitudinal | Transverse | |
| Elongation in 2 in. or 50 mm, (or 4D), min, %: | ||
| Basic minimum elongation for walls5 ⁄16 in. [8 mm] and over in thickness, strip tests, and for all small sizes tested in full section | 22 | -- |
| When standard round 2-in. or 50-mm gage length or proportionally smaller size test specimen with the gage length equal to 4D (4 times the diameter) is used | 16 | -- |
| For strip tests, a deduction for each1 ⁄32 in. [0.8 mm] decrease in wall thickness below5 ⁄16 in. [8 mm] from the basic minimum elongation of the following percentage | 1.25 | -- |
Shanghai katalor enterprises co.,ltd as ASTM A333 Grade 10 Welded Steel Pipe/tube supplier,we have Machining equipment for steel pipe deep processing, we focus on seamless steel pipe(Line pipe,Pipe for structures,Boiler Pipe,Pipe for conveyance of fluid), Welded steel pipe (general welded circular tube,square tube,Rectangular tube).if you need ASTM A333 Grade 10 Welded Steel Pipe/tube machining service,contact us!
