DIN 17175 10CrMo910 steel at higher temperatures, some up to 600 ℃,even under the long-term load still have good mechanical properties,is considered to be heat resistant steel.
10CrMo910 steel chemical composition
| Grade | Material | C | Si | Mn | P | S | Cr | Mo |
| 10CrMo910 | 1.7380 | 0.08-0.15 | ≤0.50 | 0.40-0.70 | 0.035 | 0.035 | 2.00-2.50 | 0.90-1.20 |
| Grade | Material | Tensile strength N/mm2 | Yield strength thickness,mm | Elongation (L=5do) | Notch impact energy | |||
| ≤16 | >16≤40 | >40≤60 | ||||||
| N/mm2 min | ||||||||
| 10CrMo910 | 1.7380 | 450-600 | 280 | 280 | 270 | 20 | 18 | 34 |
DIN 17175 10CrMo910 seamless steel pipe/tube dimension
outer diameter:21.3-1016mm
thickness:3-65mm
DIN 17175 10CrMo910 seamless pipe/tube applies to seamless tubes including tubes for headers of heat-resistant steels which are used in the construction of boilers,pipe-lines,pressure vessels and equipment for service up to 600 ℃ and at simultaneous high pressures,where the total stress and the relevant scaling conditions can raise or lower the temperature limit. If you need 10CrMo910 steel pipe/tube,contact us!
